Aspire Breeze 2 AIO Kit

The Aspire Breeze 2 AIO (All In One) Kit is a small pod system based kit that can hold up to 2ml of e-juice. It is comfortable to hold and has several colour finishes to suit all tastes. It has a height of 96mm therefore no bigger than a credit card in size, with a width of 35mm and thickness of 19mm.

The breeze 2 kit comes with a 1000mAh battery capacity and is framed with aluminum alloy for lightweight carrying. It has an adjustable airflow which is simple to use by pulling the mouthpiece off and turning the airflow adjustment ring to your liking.

It features a Micro USB charging port located on the side beneath the pod release button which is located on both sides of the device. The firing button is located on the front of the device and also comes with a handy drip tip protective cap. To release the pod from the unit, just squeeze the pod release buttons on either sides and remove the pod. To re-insert the pod just put it down back onto the unit until it clicks back in to place.

Aspire have also released the Breeze 2 Pod which comes with a pre-installed coil so that you can have 2 flavours on the go and be able to switch through them at convenience. The pre-installed coil is 0.6ohm and comes with another top cap so no leaks in the pocket. Coil installation is very easy as you just pull the drip tip off and unscrew the airflow component which will pull out the coil. Then just push down and unscrew the airflow component at the same time and replace with another coil. Finally, screw the airflow component back to the pod system and replace the drip tip by firmly pushing back onto the pod itself.

We also recommend when changing coils to allow the new coil to sit within the e-juice to become fully saturated for about 5 minutes to help avoid dry hits or burning the coil out. We would rate this device 10 out of 10.