Aspire PockeX AIO Kit

Aspire PockeX AIO Kit

(1 customer review)

£24.99 £18.95

Aspire PockeX AIO Starter Kit

Aspire PockeX Kit with 1x coil installed
Spare 0.6 Ohm Coil
USB Charging cabl
User Manual
Warranty Card/Manual

Top liquid fill
Top airflow
Leak proof design
USB Charger
2ml TPD compliant Tank Capacity
U-Tech sub ohm Coil – 0.6Ohm
1500mah long lasting battery


You might need this

Aspire PockeX AIO Starter Kit

The Aspire PockeX AIO Starter kit (All in One) is the small pen style device no bigger than an iPhone 5 in height and is packed with a 0.6 ohm coil with U-technology and is a sub-ohm device. It has a wide drip tip with a large top airflow for an increased vapour production. It is very discrete in size and a low-profile sub-ohm vape making it a must have whether a cheeky vape indoors or on the go.

It has a large batter capacity with a total of 1500 mAh and it works on a bypass output. The size of the device is very small and compact with a height of 117 mm and a width of a 19.7 mm making it very easy for the pocket. The firing button is located on the front of the device on the battery itself. It consists of a Delrin Drip Tip which is attached on the top and has the built in airflow that cannot be controlled. The USB charging port is located at the bottom of the device at the back and has a light indicator, red is charging and green is fully charged.

The Aspire PockeX AIO Kit is available in many colours, Matte Black, Rose Gold, Metallic Blue and many more. The Aspire PockeX AIO Kit also utilizes the U-tech coil technology which was specifically designed for great flavour and a better vaping experience overall. There are 2 coil resistance available, one being a 0.6ohm and the other being a 1.2 ohm. The 0.6ohm coils are a 316L stainless steel wire which is good for flavour and vapour production and the 1.2ohm coil is the standard kanthal wire which is ideal for high nicotine e-liquid.

Filling the Aspire PockeX AIO Starter Kit is very simple, fast and efficient. Filling the chamber up requires you to unscrew and remove the top cap and then fill the chamber to the Max Line indicated on the side of the pyrex glass and then you just screw the top cap back on. The coil screws into the top cap of the device and this allows you to change coils without having to lose any e-liquid. We also recommend once filling the chamber up and letting the coil sit within the e-liquid and becoming fully saturated for about 5 minutes before firing. We would rate this device 10 out of 10.

Additional information


, , ,


  1. I’m not a big fan of chunky devices. This one is perfect for my purse and never leaks.

Add a Review

Add a Review